We have two luggage offerings for the new BMW R1300GS including our Multi Function Rear Rack and our Pillion Rack which integrates into our rear rack.
SAVE $20 when purchasing the combination at one time
FITMENT
- BMW R1300GS (2024+)
SEE COMPATIBILITY COMMENTS BELOW
These stout plates are made of 1/4-inch aluminum, with generous-sized holes around the perimeter for tie down points. Hard anodized in black for a lasting finish with our logo tastefully laser etched.
The Multi-Function Rear has several notable unique features and benefits:
- Our Rear Rack is mounting the frame utilizing two stainless steel brackets to create a stout platform.
- The sides of our Rear Rack are bent down at an angle to making tying down luggage easier as well as be more compatible with loop-style luggage like the Mosko Moto Reckless series.
- Both the Rear Rack and Pillion Rack are pre-drilled to carry RotopaX fuel or water containers, either lengthwise or across the bike.
- Anodized with a Type 2 hard black for a durable finish.
- Generous-sized tie down points make strapping items to the rack an easy process.
- We strongly recommend using ROK Straps to secure items to your rack/bike. We have used these for years and feel they’re the safest, most convenient solution.
- The Rear Rack is approximately 13 inches wide by 11 inches long
The Rear Rack is NOT designed to carry a top box nor is it recommended.
Hardware and spacers are provided.
=======================================================
Our Pillion Rack has several notable unique features and benefits:
- Our Pillion Rack is quickly installed using the keyed seat latch mechanism, so transitioning from solo travel to two-up travel takes SECONDS.
- We have duplicated the bottom of the passenger seat so the pillion secures the front seat as well as rests on the frame to support the weight of your luggage.
- Both the Rear Rack and Pillion Rack are pre-drilled to carry RotopaX fuel or water containers, either lengthwise or across the bike.
- Anodized with a Type 2 hard black for a durable finish.
- Generous-sized tie down points make strapping items to the rack an easy process.
- We strongly recommend using ROK Straps to secure items to your rack/bike. We have used these for years and feel they’re the safest, most convenient solution.
- The Pillion Rack is approximately 13 inches wide at the front, 11 inches wide at the back and 13 inches long
MUST BE USED IN COMBINATION WITH OUR REAR RACK
Hardware and spacers are provided.
COMPATIBILITY
NOTES:
- NOT compatible in the BMW Vario saddlebag mounts - these must be removed in order to install the rear rack.
- If you are using Touratech, Outback Motortek or Hepco Becker Pannier Racks, please select the option for the "Pannier Spacer Kit" as these will be required to obtain the correct fitment with our rear rack. Other pannier rack systems are being investigated - contact us for details.
- The Pannier Rack REQUIRES the Black Dog Rear Rack as they integrate together.
- The Pillion Rack is not compatible with any other rear rack system.
- The plastic rear grab handle must be removed in order to install the rear rack or pillion rack.
- Carrying the RotopaX requires use of their specific mounts—either Standard, Deluxe or Lockable. This rack is pre-drilled to accommodate all of these mounts (not included).
MADE IN THE U.S.A.
