BDCW - Rear / Pillion Racks (KTM 1090/1190/1290 ADV)

$195.00
Write a Review
Shipping:
Calculated at Checkout
BDCW - Rear / Pillion Racks (KTM 1090/1190/1290 ADV)

Black Dog offers the ULTIMATE in versatility with our Multi-Function Rear Rack / Pillion Rack offering for the KTM  1090 / 1190 / 1290

The Multi-Function Rear Rack can be used by itself OR in conjunction with our Pillion Rack by removing the passenger seat.

  FITMENT  

  • KTM 1290 Super Adventure / T(all years)
  • KTM 1290 Super Adventure R (2017+)
  • KTM 1190 Adventure R (2014-2016)
  • KTM 1190 Adventure Standard (2013-2016)
  • KTM 1090 Adventure / R (2017+)

  REAR RACK DESIGN NOTES  

These stout plates are made of 1/4-inch aluminum with generously sized holes around the perimeter for tie-down points. The rear rack measures approximately 12-inches deep by 12-inches wide and replaces the stock plastic grab handle/rack (which is a hazard in our opinion anyway).

  NUTS, BOLTS FEATURES AND BENEFITS  

  • Offers TWO different locations to mount the RotopaX mount and one location to mount the WARN winch.

  • The “Multi-Function” part of the equation comes from the ability to mount the RotopaX carriers for one- or two-gallon fuel or water containers, for which it is pre-drilled.

  • Pre-drilled for the WARN stow plate (WARN Part # 86600—sold separately) to carry your WARN XT17 electric winches.Serious adventure riders are seeing the benefit of carrying these lightweight electric winches for recovering a bike off the beaten trail, or simply navigating around obstacles that would otherwise require a U-turn to seek alternate routes.

  • Since this rack removes the unsightly/over-sized factory grab handles (which can easily catch your boot when swinging a let over the bike—you’ve been warned!) we have built a slot to function as a hand hold—very handy indeed.

  • Mounts to the stock location – no drilling or modification required.

  • Generous tie-down holes on the perimeter.

  • Hard anodized black with our logo tastefully laser etched.

  • All necessary hardware is supplied.

  COMPATIBILITY  

  • Pre-drilled for Roto-Pax mounts

  • Compatible with all known SADDLEBAG luggage systems including KTM, Touratech, Hepco Becker, Jesse, Happy Trails, SW-Motech and Micatech.

  • The rear rack is not pre-drilled to accommodate a top box.

   PILLION RACK DESIGN NOTES   

The BDCW Pillion Rack is designed to take the place of the passenger seat and inter-locks seamlessly to our Multi-function Rear Rack, creating a HUGE flat platform for hauling luggage, tools, tents, firewood, coolers, etc.

These stout plates are made of 1/4-inch aluminum with generously sized holes around the perimeter for tie-down points. With a combined dimension of approximately 24-inches x 12-inches with our Rear Rack/ Pillion Kit, the possibilities are virtually endless.

  NUTS, BOLTS FEATURES AND BENEFITS  

  • The Pillion Rack offers SIX different locations to mount the RotopaX mount and one additional location to mount the WARN winch.

  • Securely locks in place using the keyed seat release.

  • Inter-locks with our Multi-function Rear Rack, creating one large “Helo Pad.”

  • Our unique design allows the rack to rest on the FRAME of the bike, keeping the stress off the key latch.

  • Generous tie-down holes on the perimeter.

  • Conveniently removed with the seat lock.

  • The production rear racks will be anodized black with our logo tastefully laser etched.

  • All necessary hardware is supplied.

  COMPATIBILITY  

  1. REQUIRES THE BDCW Multi-Function Rear Rack!
  2. We offer our Pillion Rack separately to accommodate customers who have already installed our Multi-function Rear Rack.
  3. Not compatible with other rear racks.
  4. Requires single driver seat as found on the 1190 Standard or 1290 Super Adventure models. KTM offers a single “Ergo Seat” (p/n 60307940000). 

SAVE $20.00 when purchasing the Rear Rack and Pillion Combination

MADE IN THE U.S.A.