We have two luggage offerings for the new BMW R1300GSA including our Multi Function Rear Rack and our Pillion Racks.
SAVE $20 when purchasing the combination at one time
FITMENT
- BMW R1300GSA (2025+)
DESIGN NOTES
These stout plates are made of 1/4-inch aluminum, with generous-sized holes around the perimeter for tie down points. Powder coated black for a lasting finish with our logo tastefully machined in the surface.
The Multi-Function Rear has several notable unique features and benefits:
- Our Rear Rack is mounted to the stock grab handle creating a stout platform.
- Our Rear Rack is pre-drilled to carry RotopaX fuel or water containers in multiple orientations and locations.
- Generous-sized tie down points make strapping items to the rack an easy process.
- We strongly recommend using ROK Straps to secure items to your rack/bike. We have used these for years and feel they’re the safest, most convenient solution.
- The Rear Rack is approximately 13 inches wide by 15 inches long
The Rear Rack is NOT designed to carry a top box nor is it recommended.
Our current design is compatible ONLY with the rear grab handle that has an electrical connection on the top box carrier. We are working on a solution for the standard grab handle as of May 2025.
Hardware and spacers are provided.
=======================================================
Our Pillion Rack has several notable unique features and benefits:
- Our Pillion Rack is quickly installed using the keyed seat latch mechanism, so transitioning from solo travel to two-up travel takes SECONDS.
- We have duplicated the bottom of the passenger seat so the pillion secures the front seat as well as rests on the frame to support the weight of your luggage.
- Generous-sized tie down points make strapping items to the rack an easy process.
- We strongly recommend using ROK Straps to secure items to your rack/bike. We have used these for years and feel they’re the safest, most convenient solution.
- The Pillion Rack is approximately 13 inches wide and 13 inches long
- Can be installed by itself or in combination with our rear rack.
Hardware is provided.
COMPATIBILITY
- Carrying the RotopaX requires use of their specific mounts—either Standard, Deluxe or Lockable. This rack is pre-drilled to accommodate all of these mounts (not included).
- Our current Rear Rack design is compatible ONLY with the rear grab handle that has an electrical connection on the top box carrier. See photos for comparison. We are working on a solution for the standard grab handle as of May 2025.
WHAT RIDERS ARE BARKING ABOUT
"I was eager to find a luggage plate to replace the passenger seat, but wanted to maintain the factory rear grab handle/rack on my 1300. The fit is mint, and it is easily swappable back to seat using the factory quick mount system. One turn of the key, and bingo... Fit, Finish, Versatility and Service, all part of doing business with Black Dog Cycle Works" - Trygve - Owner Halverson's Motorsports, Bedford, NH
MADE IN THE U.S.A.
